{"id":6006,"date":"2026-05-10T18:04:35","date_gmt":"2026-05-10T18:04:35","guid":{"rendered":"http:\/\/localhost:10016\/blog\/how-sand-3d-printing-works\/"},"modified":"2026-09-24T09:23:10","modified_gmt":"2026-09-24T09:23:10","slug":"how-sand-3d-printing-works","status":"publish","type":"post","link":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/","title":{"rendered":"\u0e27\u0e34\u0e18\u0e35\u0e01\u0e32\u0e23\u0e17\u0e33\u0e07\u0e32\u0e19\u0e02\u0e2d\u0e07\u0e40\u0e04\u0e23\u0e37\u0e48\u0e2d\u0e07\u0e1e\u0e34\u0e21\u0e1e\u0e4c 3D \u0e41\u0e1a\u0e1a\u0e17\u0e23\u0e32\u0e22: \u0e08\u0e32\u0e01\u0e44\u0e1f\u0e25\u0e4c CAD \u0e44\u0e1b\u0e08\u0e19\u0e16\u0e36\u0e07\u0e01\u0e32\u0e23\u0e2b\u0e25\u0e48\u0e2d\u0e43\u0e19 7 \u0e02\u0e31\u0e49\u0e19\u0e15\u0e2d\u0e19"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Sand 3D printing looks like magic the first time you see it: a CAD file goes in, and hours later a complete sand mold or core comes out \u2014 no pattern, no tooling, and no waiting on a pattern shop. But the process is actually a straightforward, highly repeatable production workflow that foundries around the world now run every day.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you are evaluating sand 3D printing for your foundry \u2014 as a machine purchase or as an outsourced service \u2014 you need to know exactly what happens between the CAD file and the finished casting. This guide walks through the complete process in seven steps, from digital file preparation to pouring and shakeout, with the real machine parameters, materials, and timings that matter on the shop floor.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">By the end, you will know how sand 3D printing works well enough to plan your own parts, estimate print times, and ask the right questions when you compare quotes from equipment vendors or sand 3D printing services.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" alt=\"Sand 3D printer at work building a sand mold layer by layer\" src=\"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">The 7-Step Workflow at a Glance<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Every sand 3D printing job follows the same digital-to-physical pipeline, regardless of machine size. The printing itself is <a href=\"https:\/\/en.wikipedia.org\/wiki\/Binder_jetting\" target=\"_blank\" rel=\"noopener nofollow\">binder jetting<\/a>: a printhead deposits liquid binder onto thin layers of foundry sand, building the mold or core up layer by layer. Everything before the printer is digital preparation; everything after is familiar foundry work.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"> <thead> <tr> <th>Step<\/th> <th>What happens<\/th> <th>Output<\/th> <\/tr> <\/thead> <tbody> <tr> <td>1<\/td> <td>Prepare the CAD model (part, gating, risers)<\/td> <td>Printable 3D model<\/td> <\/tr> <tr> <td>2<\/td> <td>Slice the model into layers<\/td> <td>Print file with per-layer data<\/td> <\/tr> <tr> <td>3<\/td> <td>Recoat: spread a fresh layer of sand<\/td> <td>Uniform 0.2\u20130.5 mm sand layer<\/td> <\/tr> <tr> <td>4<\/td> <td>Binder jetting: print the cross-section<\/td> <td>Bonded sand layer<\/td> <\/tr> <tr> <td>5<\/td> <td>Depowder: remove loose sand<\/td> <td>Rough sand mold or core<\/td> <\/tr> <tr> <td>6<\/td> <td>Cure, coat, inspect<\/td> <td>Strong, casting-ready mold<\/td> <\/tr> <tr> <td>7<\/td> <td>Assemble, pour, finish<\/td> <td>Finished casting<\/td> <\/tr> <\/tbody> <\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" alt=\"Digital binder jetting workflow timeline from CAD file to finished casting\" src=\"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/03\/Digital-Binder-Jetting-Workflow-Timeline.jpg\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The core insight is that steps 1\u20136 replace pattern making and core boxes entirely. The geometry lives in the digital file, not in a physical tool \u2014 which is exactly why the process is called patternless casting. For a full comparison of patternless vs. traditional sand casting, including tooling cost and lead time, see our <a href=\"\/blog\/patternless-sand-casting-guide\/\" target=\"_blank\">patternless sand casting guide<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step 1: Prepare the CAD Model<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Every sand 3D print starts with a solid 3D model. For a casting, that model is not just the finished part geometry \u2014 it is the full casting package: the part, plus the gating system, runners, risers, and any machining allowances you need.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Because the mold is printed rather than formed around a pattern, you design the mold cavity directly in the digital world. That changes what you can do:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>No draft required.<\/strong> A pattern needs taper so it can be drawn out of the sand; a 3D printed mold has no pattern to withdraw, so vertical faces can be truly vertical. You keep draft only where the casting design itself calls for it.<\/li>\n\n\n\n<li><strong>Complex cores become a single print.<\/strong> Instead of building a core box and curing separate core halves, you print the core in one piece \u2014 including internal oil passages, undercuts, and channels that would be impossible to draw from a traditional core box.<\/li>\n\n\n\n<li><strong>Minimum wall thickness around 2\u20133 mm.<\/strong> Production sand printers with furan binder reliably hold thin sections down to roughly 2\u20133 mm, far finer than most conventional molding manages. Thin ribs and details that would normally be machined can be cast directly.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Your CAD department should also settle the gating and risering strategy up front. Because you can iterate the digital model for free \u2014 reprint a revision instead of remachining a pattern \u2014 foundries typically run a flow simulation before the first print. If the part changes, you edit the file and print again; there is no pattern to scrap. That digital iteration is why <a href=\"\/blog\/cad-to-casting-digital-molds\/\" target=\"_blank\">CAD-to-casting workflows cut development cycles by weeks<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step 2: Slice the Model into Layers<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Once the model is approved, it is exported as an STL file and loaded into the machine&#8217;s slicing software. 3DPTEK&#8217;s sand printers run the in-house AFSWin3DP-L V1.0 control software, which accepts STL input, lets you position and scale the model, and slices it into the layer-by-layer instructions the printer executes.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Two parameters set in this step define most of the job:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Layer thickness.<\/strong> Production sand printers run at <strong>0.2\u20130.5 mm per layer<\/strong> (the J4000Pro runs 0.5\u20130.8 mm). Thinner layers mean finer surface detail but more layers \u2014 and therefore more time \u2014 per part. Most foundry molds run at 0.3\u20130.5 mm as the practical balance.<\/li>\n\n\n\n<li><strong>Printhead resolution.<\/strong> All 3DPTEK sand machines print at <strong>400 dpi<\/strong>, which sets the lateral detail of the cross-section.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The slicer converts each layer into a two-dimensional image, and the control system turns that image into the exact binder deposition pattern for that layer. This is where the machine&#8217;s stated accuracy takes effect in practice. J1800- and J2500-class printers hold <strong>\u00b10.3 mm on features up to 300 mm<\/strong> and <strong>\u00b10.5 mm above that<\/strong>. The large-format J4000\/J4000Pro hold <strong>\u00b10.5 mm up to 500 mm<\/strong>. Most casting tolerances sit in the \u00b10.5\u20131.0 mm band, so these numbers sit comfortably inside drawing requirements for the majority of parts.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step 3: Recoat \u2014 Spread a Fresh Layer of Sand<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Now the physical process begins. Inside the machine, a recoater spreads a fresh, even layer of foundry sand across the build platform. The layer thickness is set in the slice file, and the machine repeats this recoating cycle hundreds or thousands of times until the job is done.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The sand is standard foundry consumable: <strong>silica sand<\/strong> (typically 70\u2013140 mesh) or <strong>ceramsite sand<\/strong>, depending on the alloy and finish you need. On 3DPTEK machines the sand system is open \u2014 you qualify your own sand supply, which matters for the long-term economics of printing. Sand is loaded automatically from an external hopper, and excess powder is collected and returned to the system for reuse. With a sand reclamation line, foundries recover on the order of 95% of the sand back into the casting loop.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The recoater has to be precise, because every layer builds on the one before. Production machines use a vibratory or dual-scraper recoater driven by high-precision linear motion \u2014 3DPTEK&#8217;s recoater spreads bidirectionally with scrapers on both sides, laying sand in both travel directions with no empty return pass. The Chinese national standard for casting sand 3D printing equipment, GB\/T 42156-2023, limits recoater uniformity deviation to within 5%. Machine positioning accuracy is specified at 0.05 mm with 0.02 mm repeatability \u2014 the mechanical discipline behind consistent molds.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step 4: Binder Jetting \u2014 Print the Cross-Section with Binder<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">After each recoating pass, the printhead crosses the platform and deposits binder only where that layer should be solid. It works like an inkjet printer putting ink on paper \u2014 but with liquid resin on sand. Sand mold printing is the most established production application of binder jetting, and it is the technology behind every 3DPTEK J-series machine.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The binder system is the heart of the machine. 3DPTEK&#8217;s printers use a <strong>negative-pressure ink supply<\/strong> that circulates binder continuously, keeping the printhead primed and preventing nozzle blockages. The head prints at <strong>400 dpi<\/strong>, rides a precision linear drive, and prints in both directions to keep cycle time low. Printheads are automatically cleaned between jobs, and they are serviceable \u2014 a head that wears after a year or two in a foundry environment can often be repaired rather than replaced.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" alt=\"Binder jetting printhead depositing binder onto a fresh sand layer\" src=\"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/05\/3DP-Binder-Jetting-Sand-Mold-Printing.jpg\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Two binder families are used in production sand printing:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Furan resin<\/strong> \u2014 the workhorse for most foundry work. 3D-printed furan sand reaches <strong>1.5\u20132.5 MPa tensile strength<\/strong>, holds the 2\u20133 mm minimum wall thickness, and suits aluminum, copper, iron, and steel casting alike. Gas evolution is low \u2014 around <strong>8\u201311 ml\/g at 850 \u00b0C<\/strong> \u2014 which means fewer gas defects in the casting.<\/li>\n\n\n\n<li><strong>Phenolic resin<\/strong> \u2014 the alternative when the application needs different thermal behavior.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The binder is formulated specifically for 3D printing (low viscosity, so it flows reliably through printheads), which is one of the reasons printed molds behave differently from conventionally furan-set molds. The machine then alternates the two core actions \u2014 spread a layer, print a layer \u2014 until the build is complete. Production machines use <strong>dual build boxes that alternate<\/strong>, one printing while the other is unloaded and prepared, with an automated transport system moving boxes between the printer, cleaning station, and curing station so the printer never idles. That is how a J2500 holds 14\u201320 s\/layer cycles while moving on the order of 240 kg of sand per hour. To see how speed scales from the J1800 up to the flagship J4000Pro, our <a href=\"\/blog\/sand-3d-printer-buyer-guide\/\" target=\"_blank\">sand 3D printer buyer&#8217;s guide<\/a> lays out the full lineup.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step 5: Depowder \u2014 Release the Mold from Loose Sand<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">When the build finishes, the mold or core is still buried in loose, unbonded sand. The build box moves to a cleaning station, where the platform is slowly raised and operators \u2014 or a vacuum-and-brush system \u2014 remove the loose sand from around and inside the part.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This step deserves more planning attention than first-time users usually give it. The loose sand inside every internal cavity and core print must be reachable, which is why designers add small access points or orient cores so powder can escape. It is also the first physical quality checkpoint: any layer that failed to bond, any geometry too fragile to handle, shows up here before you invest further in the part.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" alt=\"3D printed sand cores and molds with complex internal structures\" src=\"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/04\/Sand-cores-and-sand-molds-with-complex-structures-1024x768-1.jpg\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">What comes out of the build box is a complete set of molds and cores \u2014 including the internal cores that would normally require their own core boxes. The image above shows printed cores and molds with exactly the kind of complex internal structure that is impractical, or outright impossible, to produce by conventional core blowing. That single-build capability is one of the strongest arguments for 3D printing when you look at assemblies that are currently cast as several parts and then joined.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The sand removed at the cleaning station is not waste. It is collected by an under-floor recovery system, conveyed to a hopper, and either returned to the printer&#8217;s feed or sent for reclamation. With reclamation equipment, the large majority of the build volume is reusable \u2014 one of the quiet reasons per-mold consumable cost stays low. For a transparent breakdown of what printing actually costs per mold, see our <a href=\"\/blog\/sand-3d-printing-cost\/\" target=\"_blank\">3D sand printing cost guide<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step 6: Cure, Coat, and Inspect<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The freshly depowdered mold is bonded but not yet at full strength. Two things happen next:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Curing.<\/strong> Furan-bonded 3D printed molds develop their final strength as the binder cures; the exact dwell depends on the resin, ambient conditions, and part size. The machine environment is controlled \u2014 22\u201328 \u00b0C and 30\u201350% humidity \u2014 for consistent print quality, and a dedicated curing station holds the part while the binder completes the reaction. The result is a mold that can be handled, coated, and poured without breaking down.<\/li>\n\n\n\n<li><strong>Coating.<\/strong> Most molds receive a refractory wash before pouring. The coating controls surface finish and prevents metal penetration into the sand, exactly as it does in conventional sand casting. For demanding alloys \u2014 steel at 1,500\u20131,600 \u00b0C, for example \u2014 the coating recipe is part of the alloy-specific process. It is one of the main reasons foundries keep their existing coating know-how when they adopt 3D printing.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Inspection here is quick but important: check critical dimensions against the drawing, verify core prints that must register tightly against the mold, and confirm no unbonded pockets remain. Because the mold was printed from the CAD data, dimensional consistency is excellent from part to part \u2014 the same file can be reprinted identically for low-volume production, as our <a href=\"\/blog\/patternless-casting-prototyping\/\" target=\"_blank\">patternless casting prototyping guide<\/a> shows.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step 7: Assemble, Pour, and Finish<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">From here on, the process is conventional sand casting. Cores are placed in the mold, the mold halves are closed and clamped, and the assembly goes to the pouring station.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Pouring.<\/strong> Molten metal fills the cavity through the gating system you designed in Step 1. Printed furan molds have low gas evolution and good permeability, so the pour behaves predictably \u2014 fewer blowholes and gas defects than molds with higher gas content.<\/li>\n\n\n\n<li><strong>Shakeout.<\/strong> After solidification and cooling, the mold is broken apart on the shakeout grid. Because the binder system is a normal foundry sand system, the spent sand can go to reclamation rather than to landfill.<\/li>\n\n\n\n<li><strong>Finishing.<\/strong> The casting is heat-treated if the specification requires it, gating and risers are cut off, flash and burrs are removed, and the part is blasted or machined to final dimensions.<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" alt=\"Molten metal poured into a 3D printed sand mold during casting\" src=\"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/05\/sand-3d-printing-casting-process.jpg\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The workflow difference versus conventional casting is entirely upstream. The foundry side \u2014 pouring, shakeout, heat treatment, fettling \u2014 is the same skill set your team already has. What 3D printing changes is the tooling step that used to take weeks: the pattern, the core boxes, and their lead time are gone.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How the 7 Steps Compress Your Lead Time<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The end-to-end effect is measurable. A conventional first article needs a pattern and core boxes \u2014 typically 4 to 12 weeks of tooling lead time before the first pour. A 3D printed first article needs none of that. A realistic first-part timeline looks like this:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Day 1\u20132:<\/strong> CAD model preparation, gating design, slicing.<\/li>\n\n\n\n<li><strong>Day 2\u20133:<\/strong> Printing. A J1800-class machine runs 18\u201323 s\/layer; a typical small mold is done overnight, and a full J2500 build of about 2.7 t of sand runs roughly 12\u201317 hours depending on layer thickness and part density.<\/li>\n\n\n\n<li><strong>Day 3\u20134:<\/strong> Depowdering, curing, coating, inspection.<\/li>\n\n\n\n<li><strong>Day 4\u20135:<\/strong> Core setting, mold close, pour.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">In other words, first parts in days instead of weeks \u2014 the same math that drives <a href=\"\/blog\/pump-valve-rapid-casting\/\" target=\"_blank\">rapid casting for pumps, valves, and prototypes<\/a> and the broader <a href=\"\/blog\/digital-casting-foundry\/\" target=\"_blank\">digital casting transformation of the foundry industry<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The time saving compounds when designs change. Revising a pattern means days in the pattern shop and new tooling cost; revising a 3D printed mold means editing the file and reprinting overnight. For product development, that turns &#8220;cast a revision next month&#8221; into &#8220;cast a revision tomorrow.&#8221; The same logic applies to production flexibility: if a customer&#8217;s order changes, you print the revised mold tonight instead of waiting on a pattern shop. For low-volume and spare-part runs, that responsiveness is often worth more than the tooling savings alone \u2014 the payback math is worked through in our <a href=\"\/blog\/sand-3d-printer-break-even\/\" target=\"_blank\">sand 3D printer break-even guide<\/a>. And for production runs, the flexible, low-tooling model is exactly what industry organizations such as the <a href=\"https:\/\/www.afsinc.org\/\" target=\"_blank\" rel=\"noopener nofollow\">American Foundry Society<\/a> describe as smart and green casting \u2014 digital files replacing physical inventory.<\/p>\n\n\n\n\n<p class=\"wp-block-paragraph\">The seven steps above run on machines like the <a href=\"https:\/\/www.lyafs.com\/3d-printers\/sand-3d-printers\/3dptek-j1800s\/\">3DPTEK J1800S<\/a>, <a href=\"https:\/\/www.lyafs.com\/3d-printers\/sand-3d-printers\/3dptek-j2500\/\">3DPTEK J2500<\/a> and <a href=\"https:\/\/www.lyafs.com\/3d-printers\/sand-3d-printers\/3dptek-j4000\/\">3DPTEK J4000<\/a>, depending on mold size.<\/p>\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Questions<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>How long does it take to 3D print a sand mold?<\/strong>\nIt depends on size and layer thickness. A small mold on a J1800-class machine prints overnight at 18\u201323 s\/layer; a full J2500 build of about 2.7 t of sand takes roughly 12\u201317 hours; and the flagship J4000Pro prints 1,090\u20131,744 L\/h for the largest one-piece molds. Digital preparation and post-processing each add about a day.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>What is the difference between sand 3D printing and binder jetting?<\/strong>\nThey are the same process. Sand 3D printing for casting is binder jetting: a printhead deposits liquid binder onto thin layers of sand to build a mold or core. Binder jetting is the broader technology name, and sand mold printing is its most established production application \u2014 the same principle covered in our <a href=\"\/blog\/binder-jetting-guide\/\" target=\"_blank\">binder jetting technical guide<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Do you still need a pattern with sand 3D printing?<\/strong>\nNo. The mold geometry is printed directly from the CAD file, so no physical pattern or core box is made. That is why the process is called patternless casting \u2014 the tooling step is replaced by a digital file. For a side-by-side comparison with conventional molding, see our <a href=\"\/blog\/traditional-vs-patternless-sand-casting\/\" target=\"_blank\">traditional vs. patternless sand casting guide<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Can sand 3D printing handle large molds?<\/strong>\nYes. The 3DPTEK range spans from the 1,800 \u00d7 1,000 \u00d7 700 mm build volume of the J1800 up to the flagship J4000Pro at 4,000 \u00d7 2,500 \u00d7 1,500 mm, which prints one-piece molds beyond 4 m with flexible forming. Large-format capability is one of the main reasons the technology moved from prototyping into production.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>What metals can be cast in a 3D printed sand mold?<\/strong>\nAny metal you can cast in a conventional furan sand mold: aluminum, copper alloys, iron, and steel. The printed mold behaves like a high-quality no-bake mold \u2014 low gas evolution and good permeability \u2014 so alloy selection follows the same rules as your existing sand casting process.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>How accurate are 3D printed sand molds?<\/strong>\nJ1800\/J2500-class printers hold \u00b10.3 mm on features up to 300 mm and \u00b10.5 mm above that; the J4000\/J4000Pro hold \u00b10.5 mm up to 500 mm. Because most casting tolerances sit in the \u00b10.5\u20131.0 mm band, printed molds typically satisfy the drawing without machining. Where tighter precision is needed on cores, SLS sand printing holds \u00b10.1 mm \u2014 compare the two processes in our <a href=\"\/blog\/sls-vs-3dp-sand-printing\/\" target=\"_blank\">SLS vs. 3DP sand printing guide<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusion<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Sand 3D printing is not an exotic process \u2014 it is a seven-step pipeline that replaces the pattern and core-box tooling step with a digital file. CAD preparation, slicing, recoating, binder jetting, depowdering, curing, and pouring: every step is well understood, the materials are standard foundry consumables, and your existing casting skills apply unchanged.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The result is first parts in days instead of weeks, design changes that cost a reprint instead of new tooling, and geometry freedom \u2014 thin walls, complex cores, one-piece molds \u2014 that conventional molding cannot reach. Whether you are prototyping a new pump housing, producing low-volume impellers, or consolidating a multi-piece assembly into a single casting, the process starts the same way: with a CAD file.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you want to see the 7-step workflow applied to your own parts, send us a <a href=\"\/get-a-quote\/\" target=\"_blank\">quote request<\/a> with your drawings and part list. We will review the geometry, suggest gating and core strategy, and give you a print plan and timeline before you commit to anything. If you are planning the equipment side, our <a href=\"\/blog\/integrate-sand-3d-printer-foundry\/\" target=\"_blank\">guide to integrating a sand 3D printer into your foundry<\/a> covers floor space, sand handling, and staffing.<\/p>\n\n\n\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How long does it take to 3D print a sand mold?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It depends on size and layer thickness. A small mold on a J1800-class machine prints overnight at 18\u201323 s\/layer; a full J2500 build of about 2.7 t of sand takes roughly 12\u201317 hours; and the flagship J4000Pro prints 1,090\u20131,744 L\/h for the largest one-piece molds. Digital preparation and post-processing each add about a day.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between sand 3D printing and binder jetting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"They are the same process. Sand 3D printing for casting is binder jetting: a printhead deposits liquid binder onto thin layers of sand to build a mold or core. Binder jetting is the broader technology name, and sand mold printing is its most established production application \u2014 the same principle covered in our binder jetting technical guide .\"}},{\"@type\":\"Question\",\"name\":\"Do you still need a pattern with sand 3D printing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The mold geometry is printed directly from the CAD file, so no physical pattern or core box is made. That is why the process is called patternless casting \u2014 the tooling step is replaced by a digital file. For a side-by-side comparison with conventional molding, see our traditional vs. patternless sand casting guide .\"}},{\"@type\":\"Question\",\"name\":\"Can sand 3D printing handle large molds?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The 3DPTEK range spans from the 1,800 \u00d7 1,000 \u00d7 700 mm build volume of the J1800 up to the flagship J4000Pro at 4,000 \u00d7 2,500 \u00d7 1,500 mm, which prints one-piece molds beyond 4 m with flexible forming. Large-format capability is one of the main reasons the technology moved from prototyping into production.\"}},{\"@type\":\"Question\",\"name\":\"What metals can be cast in a 3D printed sand mold?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Any metal you can cast in a conventional furan sand mold: aluminum, copper alloys, iron, and steel. The printed mold behaves like a high-quality no-bake mold \u2014 low gas evolution and good permeability \u2014 so alloy selection follows the same rules as your existing sand casting process.\"}},{\"@type\":\"Question\",\"name\":\"How accurate are 3D printed sand molds?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"J1800\/J2500-class printers hold \u00b10.3 mm on features up to 300 mm and \u00b10.5 mm above that; the J4000\/J4000Pro hold \u00b10.5 mm up to 500 mm. Because most casting tolerances sit in the \u00b10.5\u20131.0 mm band, printed molds typically satisfy the drawing without machining. Where tighter precision is needed on cores, SLS sand printing holds \u00b10.1 mm \u2014 compare the two processes in our SLS vs. 3DP sand printing guide .\"}}]}<\/script>\n\n","protected":false},"excerpt":{"rendered":"<p>\u0e27\u0e34\u0e18\u0e35\u0e01\u0e32\u0e23\u0e1e\u0e34\u0e21\u0e1e\u0e4c 3D \u0e14\u0e49\u0e27\u0e22\u0e17\u0e23\u0e32\u0e22\u0e43\u0e19 7 \u0e02\u0e31\u0e49\u0e19\u0e15\u0e2d\u0e19: \u0e15\u0e31\u0e49\u0e07\u0e41\u0e15\u0e48\u0e01\u0e32\u0e23\u0e40\u0e15\u0e23\u0e35\u0e22\u0e21\u0e44\u0e1f\u0e25\u0e4c CAD \u0e44\u0e1b\u0e08\u0e19\u0e16\u0e36\u0e07\u0e01\u0e32\u0e23\u0e40\u0e04\u0e25\u0e37\u0e2d\u0e1a\u0e0a\u0e31\u0e49\u0e19\u0e43\u0e2b\u0e21\u0e48 \u0e01\u0e32\u0e23\u0e09\u0e35\u0e14\u0e2a\u0e32\u0e23\u0e22\u0e36\u0e14\u0e40\u0e01\u0e32\u0e30 \u0e01\u0e32\u0e23\u0e01\u0e33\u0e08\u0e31\u0e14\u0e1c\u0e07 \u0e41\u0e25\u0e30\u0e01\u0e32\u0e23\u0e40\u0e17 \u2014 \u0e04\u0e39\u0e48\u0e21\u0e37\u0e2d\u0e04\u0e23\u0e1a\u0e16\u0e49\u0e27\u0e19\u0e2a\u0e33\u0e2b\u0e23\u0e31\u0e1a\u0e17\u0e35\u0e21\u0e42\u0e23\u0e07\u0e2b\u0e25\u0e48\u0e2d<\/p>","protected":false},"author":1,"featured_media":5866,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_oxygen_hide_in_design_set":false,"_oxygen_tags":"","footnotes":""},"categories":[40,4],"tags":[9,5,21],"class_list":["post-6006","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-guides-how-to","category-sand-3d-printing","tag-patternless-casting","tag-sand-3d-printer","tag-workflow-integration"],"yoast_head":"<title>How Sand 3D Printing Works: CAD to Casting in 7 Steps - 3DPTEK | AFS<\/title>\n<meta name=\"description\" content=\"How sand 3D printing works from CAD to finished casting: file prep, recoating, binder jetting, depowdering, and pouring \u2014 step by step for foundry teams.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/\" \/>\n<meta property=\"og:locale\" content=\"th_TH\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How Sand 3D Printing Works: CAD to Casting in 7 Steps - 3DPTEK | AFS\" \/>\n<meta property=\"og:description\" content=\"How sand 3D printing works from CAD to finished casting: file prep, recoating, binder jetting, depowdering, and pouring \u2014 step by step for foundry teams.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/\" \/>\n<meta property=\"og:site_name\" content=\"3DPTEK | AFS\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/profile.php?id=100093519070922\" \/>\n<meta property=\"article:published_time\" content=\"2026-05-10T18:04:35+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-24T09:23:10+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg\" \/>\n<meta name=\"author\" content=\"Jeff\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:image\" content=\"https:\/\/lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Jeff\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"15 \u0e19\u0e32\u0e17\u0e35\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/\"},\"author\":{\"name\":\"Jeff\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#\\\/schema\\\/person\\\/0a46696ff959c86c3758ad7590adf5c3\"},\"headline\":\"How Sand 3D Printing Works: From CAD File to Casting in 7 Steps\",\"datePublished\":\"2026-05-10T18:04:35+00:00\",\"dateModified\":\"2026-09-24T09:23:10+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/\"},\"wordCount\":2937,\"publisher\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Sand-3D-printer-at-work.jpg\",\"keywords\":[\"Patternless Casting\",\"Sand 3D Printer\",\"Workflow Integration\"],\"articleSection\":[\"Guides &amp; How-To\",\"Sand 3D Printing\"],\"inLanguage\":\"th\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/\",\"url\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/\",\"name\":\"How Sand 3D Printing Works: CAD to Casting in 7 Steps - 3DPTEK | AFS\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Sand-3D-printer-at-work.jpg\",\"datePublished\":\"2026-05-10T18:04:35+00:00\",\"dateModified\":\"2026-09-24T09:23:10+00:00\",\"description\":\"How sand 3D printing works from CAD to finished casting: file prep, recoating, binder jetting, depowdering, and pouring \u2014 step by step for foundry teams.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/#breadcrumb\"},\"inLanguage\":\"th\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"th\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Sand-3D-printer-at-work.jpg\",\"contentUrl\":\"https:\\\/\\\/www.lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Sand-3D-printer-at-work.jpg\",\"width\":1600,\"height\":900,\"caption\":\"Sand 3D printer at work in a foundry\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/how-sand-3d-printing-works\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How Sand 3D Printing Works: From CAD File to Casting in 7 Steps\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#website\",\"url\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/\",\"name\":\"3DPTEK | AFS\",\"description\":\"Renowned Chinese Industrial-Grade 3D Printing &amp; Rapid-Casting Solutions Provider\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"th\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#organization\",\"name\":\"3DPTEK (3D Printing Technology Inc.)\",\"url\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"th\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/logo-34.png\",\"contentUrl\":\"https:\\\/\\\/lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/logo-34.png\",\"width\":232,\"height\":34,\"caption\":\"3DPTEK (3D Printing Technology Inc.)\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/ar\\\/#\\\/schema\\\/person\\\/0a46696ff959c86c3758ad7590adf5c3\",\"name\":\"Jeff\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"th\",\"@id\":\"https:\\\/\\\/www.lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Jeff-150x150.jpg\",\"url\":\"https:\\\/\\\/www.lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Jeff-150x150.jpg\",\"contentUrl\":\"https:\\\/\\\/www.lyafs.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Jeff-150x150.jpg\",\"caption\":\"Jeff\"},\"description\":\"With 30+ years of additive manufacturing experience and 25+ sand 3D printers running in our own facilities, the 3DPTEK engineering team writes from hands-on production experience \u2014 not theory. We operate what we sell.\",\"sameAs\":[\"https:\\\/\\\/www.lyafs.com\",\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=100093519070922\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/jeff-wei-56812b244\\\/\"],\"url\":\"https:\\\/\\\/www.lyafs.com\\\/th\\\/blog\\\/author\\\/test\\\/\"}]}<\/script>","yoast_head_json":{"title":"How Sand 3D Printing Works: CAD to Casting in 7 Steps - 3DPTEK | AFS","description":"How sand 3D printing works from CAD to finished casting: file prep, recoating, binder jetting, depowdering, and pouring \u2014 step by step for foundry teams.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/","og_locale":"th_TH","og_type":"article","og_title":"How Sand 3D Printing Works: CAD to Casting in 7 Steps - 3DPTEK | AFS","og_description":"How sand 3D printing works from CAD to finished casting: file prep, recoating, binder jetting, depowdering, and pouring \u2014 step by step for foundry teams.","og_url":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/","og_site_name":"3DPTEK | AFS","article_author":"https:\/\/www.facebook.com\/profile.php?id=100093519070922","article_published_time":"2026-05-10T18:04:35+00:00","article_modified_time":"2026-09-24T09:23:10+00:00","og_image":[{"url":"https:\/\/lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg","type":"","width":"","height":""}],"author":"Jeff","twitter_card":"summary_large_image","twitter_image":"https:\/\/lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg","twitter_misc":{"Written by":"Jeff","Est. reading time":"15 \u0e19\u0e32\u0e17\u0e35"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/#article","isPartOf":{"@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/"},"author":{"name":"Jeff","@id":"https:\/\/www.lyafs.com\/ar\/#\/schema\/person\/0a46696ff959c86c3758ad7590adf5c3"},"headline":"How Sand 3D Printing Works: From CAD File to Casting in 7 Steps","datePublished":"2026-05-10T18:04:35+00:00","dateModified":"2026-09-24T09:23:10+00:00","mainEntityOfPage":{"@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/"},"wordCount":2937,"publisher":{"@id":"https:\/\/www.lyafs.com\/ar\/#organization"},"image":{"@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg","keywords":["Patternless Casting","Sand 3D Printer","Workflow Integration"],"articleSection":["Guides &amp; How-To","Sand 3D Printing"],"inLanguage":"th"},{"@type":"WebPage","@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/","url":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/","name":"How Sand 3D Printing Works: CAD to Casting in 7 Steps - 3DPTEK | AFS","isPartOf":{"@id":"https:\/\/www.lyafs.com\/ar\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/#primaryimage"},"image":{"@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg","datePublished":"2026-05-10T18:04:35+00:00","dateModified":"2026-09-24T09:23:10+00:00","description":"How sand 3D printing works from CAD to finished casting: file prep, recoating, binder jetting, depowdering, and pouring \u2014 step by step for foundry teams.","breadcrumb":{"@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/#breadcrumb"},"inLanguage":"th","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/"]}]},{"@type":"ImageObject","inLanguage":"th","@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/#primaryimage","url":"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg","contentUrl":"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/05\/Sand-3D-printer-at-work.jpg","width":1600,"height":900,"caption":"Sand 3D printer at work in a foundry"},{"@type":"BreadcrumbList","@id":"https:\/\/www.lyafs.com\/th\/blog\/how-sand-3d-printing-works\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.lyafs.com\/th\/"},{"@type":"ListItem","position":2,"name":"How Sand 3D Printing Works: From CAD File to Casting in 7 Steps"}]},{"@type":"WebSite","@id":"https:\/\/www.lyafs.com\/ar\/#website","url":"https:\/\/www.lyafs.com\/ar\/","name":"3DPTEK | AFS","description":"\u0e1c\u0e39\u0e49\u0e43\u0e2b\u0e49\u0e1a\u0e23\u0e34\u0e01\u0e32\u0e23\u0e42\u0e0b\u0e25\u0e39\u0e0a\u0e31\u0e19\u0e01\u0e32\u0e23\u0e1e\u0e34\u0e21\u0e1e\u0e4c 3D \u0e41\u0e25\u0e30\u0e2b\u0e25\u0e48\u0e2d\u0e41\u0e1a\u0e1a\u0e23\u0e27\u0e14\u0e40\u0e23\u0e47\u0e27\u0e23\u0e30\u0e14\u0e31\u0e1a\u0e2d\u0e38\u0e15\u0e2a\u0e32\u0e2b\u0e01\u0e23\u0e23\u0e21\u0e0a\u0e31\u0e49\u0e19\u0e19\u0e33\u0e08\u0e32\u0e01\u0e08\u0e35\u0e19","publisher":{"@id":"https:\/\/www.lyafs.com\/ar\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.lyafs.com\/ar\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"th"},{"@type":"Organization","@id":"https:\/\/www.lyafs.com\/ar\/#organization","name":"3DPTEK (3D Printing Technology Inc.)","url":"https:\/\/www.lyafs.com\/ar\/","logo":{"@type":"ImageObject","inLanguage":"th","@id":"https:\/\/www.lyafs.com\/ar\/#\/schema\/logo\/image\/","url":"https:\/\/lyafs.com\/wp-content\/uploads\/2026\/08\/logo-34.png","contentUrl":"https:\/\/lyafs.com\/wp-content\/uploads\/2026\/08\/logo-34.png","width":232,"height":34,"caption":"3DPTEK (3D Printing Technology Inc.)"},"image":{"@id":"https:\/\/www.lyafs.com\/ar\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.lyafs.com\/ar\/#\/schema\/person\/0a46696ff959c86c3758ad7590adf5c3","name":"\u0e40\u0e08\u0e1f\u0e1f\u0e4c","image":{"@type":"ImageObject","inLanguage":"th","@id":"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/09\/Jeff-150x150.jpg","url":"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/09\/Jeff-150x150.jpg","contentUrl":"https:\/\/www.lyafs.com\/wp-content\/uploads\/2026\/09\/Jeff-150x150.jpg","caption":"Jeff"},"description":"\u0e14\u0e49\u0e27\u0e22\u0e1b\u0e23\u0e30\u0e2a\u0e1a\u0e01\u0e32\u0e23\u0e13\u0e4c\u0e14\u0e49\u0e32\u0e19\u0e01\u0e32\u0e23\u0e1c\u0e25\u0e34\u0e15\u0e41\u0e1a\u0e1a\u0e40\u0e1e\u0e34\u0e48\u0e21\u0e0a\u0e31\u0e49\u0e19 (additive manufacturing) \u0e21\u0e32\u0e01\u0e01\u0e27\u0e48\u0e32 30 \u0e1b\u0e35 \u0e41\u0e25\u0e30\u0e40\u0e04\u0e23\u0e37\u0e48\u0e2d\u0e07\u0e1e\u0e34\u0e21\u0e1e\u0e4c 3 \u0e21\u0e34\u0e15\u0e34\u0e41\u0e1a\u0e1a\u0e17\u0e23\u0e32\u0e22\u0e21\u0e32\u0e01\u0e01\u0e27\u0e48\u0e32 25 \u0e40\u0e04\u0e23\u0e37\u0e48\u0e2d\u0e07\u0e17\u0e35\u0e48\u0e17\u0e33\u0e07\u0e32\u0e19\u0e2d\u0e22\u0e39\u0e48\u0e43\u0e19\u0e42\u0e23\u0e07\u0e07\u0e32\u0e19\u0e02\u0e2d\u0e07\u0e40\u0e23\u0e32\u0e40\u0e2d\u0e07 \u0e17\u0e35\u0e21\u0e27\u0e34\u0e28\u0e27\u0e01\u0e23\u0e02\u0e2d\u0e07 3DPTEK \u0e40\u0e02\u0e35\u0e22\u0e19\u0e08\u0e32\u0e01\u0e1b\u0e23\u0e30\u0e2a\u0e1a\u0e01\u0e32\u0e23\u0e13\u0e4c\u0e01\u0e32\u0e23\u0e1c\u0e25\u0e34\u0e15\u0e08\u0e23\u0e34\u0e07 \u2014 \u0e44\u0e21\u0e48\u0e43\u0e0a\u0e48\u0e08\u0e32\u0e01\u0e17\u0e24\u0e29\u0e0e\u0e35 \u0e40\u0e23\u0e32\u0e43\u0e0a\u0e49\u0e1c\u0e25\u0e34\u0e15\u0e20\u0e31\u0e13\u0e11\u0e4c\u0e17\u0e35\u0e48\u0e40\u0e23\u0e32\u0e02\u0e32\u0e22\u0e40\u0e2d\u0e07.","sameAs":["https:\/\/www.lyafs.com","https:\/\/www.facebook.com\/profile.php?id=100093519070922","https:\/\/www.linkedin.com\/in\/jeff-wei-56812b244\/"],"url":"https:\/\/www.lyafs.com\/th\/blog\/author\/test\/"}]}},"_links":{"self":[{"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/posts\/6006","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/comments?post=6006"}],"version-history":[{"count":8,"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/posts\/6006\/revisions"}],"predecessor-version":[{"id":7290,"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/posts\/6006\/revisions\/7290"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/media\/5866"}],"wp:attachment":[{"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/media?parent=6006"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/categories?post=6006"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lyafs.com\/th\/wp-json\/wp\/v2\/tags?post=6006"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}